Pole Mount clip

Hammarprodukter’s pole mount clip enables signs and plates to be mounted without drilling. This retains the integrity of galvanised poles, by not allowing a rust forming location.

The clip is mounted using stainless cable straps, or for temporary installation or alignment checks, by plastic cable tie. Strap mounting also enables signage angle to be fine tuned during installation.

Sign plates with 3.5mm holes are bolted to the backing clip. The slotted clip is then strap tied to the pole, post or structure.

Strap tie slot width: 7.9mm
Bolt hole diameter: 3.5mm

Pole mount clip application